Fully submersible sewage submersible pump for stationary or mobile submersible installation for pumping sewage and faecal wastewater (EN 12050-1 taikymo sritis). Hidraulikos korpusas ir darbaratis iš ketaus, variklio korpusas iš nerūdijančio plieno. Iš terpės ir variklio pusės sandarinama dviem nuo sukimosi krypties nepriklausomais mechaniniais sandarikliais. Kintamosios srovės pumpuojama terpe aušinamas variklis su šilumine variklio apsauga su integruotu eigos kondensatoriumi, sandarinimo kamera ir savaime įsijungiančiu terminės variklio kontrolės įtaisu. Atjungiamas sujungimo kabelis su įžemintu kištuku ir plūdiniu jungikliu.
Hydraulic equipment data |
Maximum working pressure p |
0,6 bar |
Pressure tube |
DN 50 |
Free diameter of the hydraulics passage |
50 mm |
Type of hydraulic system |
Free-current impeller |
Large. Immersion depth |
7 m |
Feed height, max. Hmax |
5,7 m |
Debit max. Qmax |
20,0 m³/h |
Min. operating temperature Tmin |
3 °C |
Max. Max. operating medium temperature Tmax |
40 °C |
Min. ambient temperature Tmin |
3 °C |
Max. Max. ambient temperature Tmax |
40 °C |
Engine data |
Type |
S 13.M-08/EAD1-2-M 1,1kW |
Power supply voltage |
1~230 V, 50 Hz |
Voltage deviation |
±10 % |
Rated engine power P2 |
1,1 kW |
Consumption power P1 max |
1,59 kW |
Rated current IN |
7,2 A |
Start-up current I |
29 A |
Operating mode (submerged) |
S1 |
Operating mode (not in operation) |
S2-15 min. |
Rated speed n |
2899 1/min |
Power factor |
0,97 |
Method of activation |
Direct on the network (DOL) |
Number of poles |
2 |
Max. switching frequency t |
60 1/h |
Insulation class |
F |
Engine protection class |
IP68 |
Cable |
Connecting cable length |
10 m |
Cable type |
H07RN-F |
Cable cross-section |
3G1 mm² |
Type of connecting cable |
Disconnecting |
Equipment/function |
Network plug |
CEE7/7 (with earthing) |
Float switch |
Yes |
Shredder |
No |
Explosion protection type |
– |
Engine protection |
Bimetal |
Engine leak check |
No |
Sealing chamber leak monitoring |
Optional |
Leak chamber leakage monitoring |
No |
Materials |
Pump casing |
Ketus |
Workbench |
Ketus |
Velen |
Stainless steel |
Seal material on the pump side |
Silicon carbide |
Seal material on the engine side |
NBR |
Seal material |
NBR |
Engine material |
Stainless steel |
Installation dimensions |
Access connector |
DN 50 |
Output connector |
DN 50 |