Top quality products 
Professional advice 
Free delivery from 100€ 
100% Secure checkout
Fully submersible sewage submersible pump for stationary or mobile submersible installation for pumping sewage and faecal wastewater (EN 12050-1 scope). Hydraulics housing and impeller in cast iron, motor housing in stainless steel. Two mechanical seals, independent of the direction of rotation, on the medium and motor side. The AC pumped medium cooled motor shall be equipped with a thermal motor protection system with integrated stroke capacitor, sealing chamber and self-activating thermal motor control. Disconnect the connection cable with a grounded plug.
| Hydraulic equipment data | |
|---|---|
| Maximum working pressure p | 0,6 bar |
| Pressure tube | DN 50 |
| Free diameter of the hydraulics passage | 50 mm |
| Type of hydraulic system | Free-current impeller |
| Large. Immersion depth | 7 m |
| Feed height, max. Hmax | 5,7 m |
| Debit max. Qmax | 20,0 m³/h |
| Min. operating temperature Tmin | 3 °C |
| Max. Max. operating medium temperature Tmax | 40 °C |
| Min. ambient temperature Tmin | 3 °C |
| Max. Max. ambient temperature Tmax | 40 °C |
| Engine data | |
|---|---|
| Type | S 13.M-08/EAD1-2-M 1,1kW |
| Power supply voltage | 1~230 V, 50 Hz |
| Voltage deviation | ±10 % |
| Rated engine power P2 | 1,1 kW |
| Consumption power P1 max | 1,59 kW |
| Rated current IN | 7,2 A |
| Start-up current I | 29 A |
| Operating mode (submerged) | S1 |
| Operating mode (not in operation) | S2-15 min. |
| Rated speed n | 2899 1/min |
| Power factor | 0,97 |
| Method of activation | Direct on the network (DOL) |
| Number of poles | 2 |
| Max. switching frequency t | 60 1/h |
| Insulation class | F |
| Engine protection class | IP68 |
| Cable | |
|---|---|
| Connecting cable length | 10 m |
| Cable type | H07RN-F |
| Cable cross-section | 3G1 mm² |
| Type of connecting cable | Disconnecting |
| Equipment/function | |
|---|---|
| Network plug | CEE7/7 (with earthing) |
| Float switch | No |
| Shredder | No |
| Explosion protection type | – |
| Engine protection | Bimetal |
| Engine leak check | No |
| Sealing chamber leak monitoring | Optional |
| Leak chamber leakage monitoring | No |
| Materials | |
|---|---|
| Pump casing | Ketus |
| Workbench | Ketus |
| Velen | Stainless steel |
| Seal material on the pump side | Silicon carbide |
| Seal material on the engine side | NBR |
| Seal material | NBR |
| Engine material | Stainless steel |
| Installation dimensions | |
|---|---|
| Access connector | DN 50 |
| Output connector | DN 50 |